PLANITHERM® TOTAL +
PLANITHERM® TOTAL+ is a low-emissivity glass for double- and triple-glazed units. It balances thermal insulation and solar gain, while also helping to maximise natural daylight.
View Product PLANITHERM® ONE T is a higher-performance1 low-emissivity (low-E) glass with an optimum centre-pane U-value of 1.0 W/m².K in a double-glazed unit2. One of the most thermally insulating products within the PLANITHERM® family, it can help meet a range of glass specifications.
PLANITHERM® ONE T can support the prevention of overheating in larger glazed areas3, to help maximise the use of living and working spaces. Its “single-stock” coating means the glass can be used in annealed or toughened form, and it can be toughened to meet the safety requirements of BS EN 12150. PLANITHERM® ONE T can also be incorporated into the STADIP® laminated glass range, to help support additional project requirements.
Made using PLANICLEAR®, lower-carbon flat glass as standard, PLANITHERM® ONE T uses a substrate with a new, third-party verified EPD4 published in June 2026. The new declaration shows a carbon reduction of more than 34% compared with the previous PLANICLEAR® EPD, with PLANICLEAR® now achieving 7.22 kg CO₂e/m² for 4 mm glass across Global Warming Potential categories A1–A3. This flat glass substrate is manufactured as standard by Saint-Gobain Glass UK & Ireland.
All images are for illustration purposes only
ANNEALED AND TOUGHENED GLASS
PLANITHERM® ONE T is a ‘‘single- stock’’ coating and therefore can be used in either annealed or toughened form. It can be toughened to meet the safety requirements of BS EN 12150.
LAMINATED GLASS
PLANITHERM® ONE T can be incorporated into the STADIP® laminated glass range. Please contact us for lead times and availability.
THERMAL INSULATION
REDUCED OVERHEATING
ENVIRONMENTAL CREDENTIALS
RESIDENTIAL NEW BUILD SOLUTIONS
COMMERCIAL NEW BUILD AND RENOVATION SOLUTIONS
| PERFORMANCE | Double-Glazed Unit (DGU) | Triple-Glazed Unit (TGU) |
|---|---|---|
| External pane | PLANICLEAR® | PLANICLEAR® |
| Internal pane | PLANITHERM® ONE T | PLANITHERM® ONE T |
| Composition in mm | 4 (16) 4 | 4 (16) 4 (16) 4 |
| Low-emissivity coating position | Face 36 | Faces 3 & 5 |
| Light transmittance TL** (%) | 67 | 51 |
| Light reflectance, external RLE** (%) | 25 | 35 |
| Solar factor g-value** (argon 90%) | 0.49 | 0.37 |
| U-value in W/m².K* (argon 90%) | 1.0 | 0.5 |
*according to EN673 **according to EN410
PLANITHERM® ONE T must always be processed into an insulating glass unit (IGU) with the coating positioned towards the inside of the cavity. It is not suitable for single glazing applications. The Saint-Gobain recommendation is to always toughen the centre-pane of a triple-glazed unit when using silica glass. For full processing and handling instructions please refer to the document ‘‘Guidance for use – ‘‘single-stock’’ low-E coated glass’’. Available from Saint-Gobain Glass on request.
Performance data calculated using Calumen.com and is correct at the time of publishing (21.10.2026) but is subject to change at any time. This website page is regularly updated; information is subject to change. Please check with your local sales and specification team. All trademarks are registered trademarks of Saint-Gobain Glass or affiliates, part of Saint-Gobain group. Images are for illustrative purposes only.